Navy TACAMO Hangar


Tinker AFB, Oklahoma




Air Force Contracting


HGL Construction served as the prime contractor on this highly-complex 44,444 square foot new construction project of a modified Type II High-Bay Hangar at Tinker AFB, OK, for NAVFAC Southeast. The new TACAMO (Take Charge and Move Out) hangar includes shop space, offices, restrooms, storage and maintenance work areas, and aircraft personnel staging and planning areas. The hangar, located on an active flight line and taxiway, required clearing and grubbing, site demolition, underground utility demolition, excavation and earthwork, new underground utilities (gas, power, water, telecommunication/data, storm sewer, and sanitary sewer), site grading, cast-in-place concrete foundation, structural steel, precast concrete wall panels, insulated metal wall panels, standing seam metal roof, EPDM roof, mechanical (HVAC and plumbing), electrical service, lighting, AFFF fire protection, fire alarm, mass notification system, Direct Digital Controls (DDC), interior finishes, painting, FF&E, airfield pavement, pavement and striping.


  • USGBC LEED Silver Construction

  • Tied into and performed adjacent to an active and occupied Navy hangar

  • 14”-Thick 650-Flex Reinforced Airfield Pavement

  • 40,000-gallon Aqueous Film Forming Foam (AFFF) Fire Suppression System, first of its kind at Tinker AFB

  • 2 Tornado Shelters

  • 9-Ton Overhead Bridge Crane on Trolley Rails with Wireless Remote

  • MEGA-Door System with Removal Mullions for Airplane Wings

  • AT/FP Security Fence Installed with 30-FT Standoff from Hangar

  • Enhanced Commissioning on Hydronic and Air Systems, as well as Controls

  • Tilt-Up Precast Concrete Wall Panels

  • Three- and Five-Part Epoxy Flooring

  • 78-FT tall, 171-FT wide and 215-FT long


2000 SDouglas Blvd. 

Midwest City, OK 73130


Tel  (405) 737-7588

Fax (405) 869-4995

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon

© 2019 HGL Construction. All Rights Reserved